Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 27.06.2025 18:36

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

a photo is worth a thousand words.

but I think this circuit , shows a few more pieces.

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

Scientists hooking flies on cocaine to study addiction: Reports - WKRN News 2

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

I post the exact comment here.

Smell and sight can spot Parkinson’s disease years earlier, study finds - The Brighter Side of News

2024–10–10[John johnson John Johnson ]

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

One

What do you think of Sony's generative AI rendering Aloy in a Horizon: Forbidden West demo?

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

A fuse is a non-resetable over current circuit protector.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

Person with measles visited Boston hotel, museum, airport, health officials warn - NBC Boston

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

eight

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

Why cant school buses ditch kids who are late to the bus at the school? Like on the way home, if a kid is late when all the others arrived to the bus on time, why cant they leave the late kid behind since its not fair to the on time kids to wait?

These are simplified answers to the original question, and does not change anything I wrote above.

but this device (an Inductor) … impedes the rapid changes in the current.

Now when you have a certain ac resistance, then a current flows in a loop.

Marchand nets 2OT winner as Florida evens Finals - ESPN

This is 'the assistant's answer'

In schematic diagrams this is the symbol for a fuse:

This one hit behind the barn.

Eligendi molestiae corrupti numquam voluptatum doloremque laudantium eum.

2024–10–16 [ OO OLAOYE OYEBODE ]

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

Satellite measures river flow waves for the first time - The Washington Post

This device then solves the entire problem.

There are two important concepts here.

He then asserts :

Kate Middleton shares heartfelt message after unexpectedly pulling out of Royal Ascot - Page Six

What is lightning?

the problem then depends on "how fast does the fuse operate?".

For this case there are devices called Metal oxide varistors (MOV).

“NASA’s Ambitious Venture Unveiled”: A Groundbreaking $488 Million Mission With a New Telescope Set to Revolutionize Space Data - Rude Baguette

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

Ethereum faces macro crisis: Can ETH’s $2K hold? – KEY insights reveal… - AMBCrypto

He then describes Rainy Season and Lightning.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

These devices are installed between the “hot” and “neutral” and protective ground.

Snap plans to sell lightweight, consumer AR glasses in 2026 - TechCrunch

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

A circuit breaker is similar, but is resettable.

So, the voltage could go up to 500 volts, and the fuse will not open up.

Star-shaped brain cells may underpin the brain's massive memory storage - Live Science

Barnstars:

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

It also is a device that limits the change in current flow.

Why U.S. bull market for stocks is still intact, according to this strategist - MarketWatch

It seems Mohan does not understand the difference between a comment and an Answer.

The bolt then partially travels down the line to your home.

Here is a simplified AC power diagram.

Are vampires real?

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

The MOV will conduct when the voltage exceeds 50% of line voltage.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

There are three different concepts here that are getting confused.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

[old diagram got deleted by accident]

But… the neutral is now “floating” because of the 1 ohm resistance.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

But it can get overloaded, and no longer works.

This is where the MOV conducts again, and dissipated the energy.

[image of Common-mode choke]

At least they know the answer if they wanted it.

What does a fuse do?

The other is “what does a “fuse” do?”

Because the load is inductive, the current lags the voltage.(by a bit).

nine

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

At one ohm, the resistor has a maximum of 1 watt power.

This is where this question deviates from being a 'generic' question, and becomes more specific.

The third is lightning and “how it gets conducted into a home.”

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

so, what happens?

Edit 2024–10.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

2024–10–14 [Omar Gharbi Omar Gharbi ]

Upvotes:

First Sentence:

One is “what exactly is in a ‘surge protector’ ? ”

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

(Dc diagram shown, AC is similar).

An AC voltage/ current source, and an ac inductive load.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

what exactly is a ‘surge’ protector?

Can the fuse protect the electronic devices from lightning instead of a surge protector.

He then describes the function of a fuse.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.